Welcome to FallsFiltration

Oil Bath: How to Determine Correct Type Filter

TABLE F: SELECTION TABLE
Key 1	Key 2	Key 3	Key 4	Key 5	Key 6	Blower CFM	Bottom Opening Type with No Relief Valve	Bottom Opening Type with Relief Valve	Max. Base Size	Min. Base Size
80	53	40	27	20	10	64	F80S	FV83S	2”	½”
140	93	70	47	35	18	112	F140S	FV143S	2 ½”	1”
250	167	125	83	63	32	200	F250S	FV253S	3”	1 ¼”
350	233	175	117	88	44	280	F350S	FV353S	4”	1 ½”
550	367	275	183	138	69	440	F570S	FV550S	5”	2”
850	567	425	283	213	107	680	F858S	FV858S	6”	3”
1200	800	600	400	300	150	960	F1208S	FV1208S	8”	4”
1700	1133	850	567	425	213	1360	F1708S	FV1708S	12”	6”
2800	1867	1400	933	700	350	2240	F2808S	FV2808S	14”	8”
4000	2667	2000	1333	1000	500	3200	F4008S	FV4008S	18”	10”
6500	4333	3250	2167	1625	813	5200	F6508S	FV6508S	22”	16”

*These models furnished as assemblies of two large oil bath filters and manifolds. Dimension details on request.
Note: All of the above models have Full Hoods. For application where space limitation do not permit full hood, units are available with special tops. Note: All units listed have fixed skirt settings 1/8” below oil level except units with relief valves. Relief valve units have skirt set 3/8” above oil level.

TABLE G: TYPES AND SIZES OF BASES AVAILABLE

Male Pipe Thread

Flange Type Mounting

Standard Pipe Sizes

½”

¾”

1”

1¼”

1½”

2”

2½”

3”

3½”

4”

5”

6”

8”

10”

12”

14”

16”

18”

20”

22”

24”

26”

Code No. For-Male Pipe Thread

GZZ

*American 125 lb. Std. Flange

EZZ

EXZ

EYZ

EOZ

*Units furnished with studs to match American 125-lb. Standard or Taylor Standard pipe flanges. (Companion flanges not furnished by Falls Filtration.) Available for sizes F80S through F350S only.

TABLE H
Bottom Opening Model	Diameter	Height (less Base)	Approx. Oil Capacity (in pints)	Shipping Weight in Lbs.
F80S	6”	5”	1/3	4
F140S	8 ¼”	6 5/8”	1	8
F250S	10 ¾”	8 1/8”	1 ½	12
F350S	11 ½”	9”	2 ¾	15
F570S	13 ¾”	11”	6	25
F858S	16 ¾”	13 ¼”	7	45
F1208S	21”	18 3/8”	30	160
F1708S	24”	20 ½”	39	195
F2808S	32 ½”	24 7/8”	68	325
F4008S	38”	29 ¾”	104	510
F6508S	52”	35 ¼”	168	800

(See TABLE G for Bases Available)

TABLE J
Bottom Opening With Relief Valve	Diameter	Height (less Base)	Approx. Oil Capacity (in pints)	Shipping Weight in Lbs.
FV83S	6”	6 1/8”	1/3	5
FV143S	8 ¼”	8 1/8”	1	8
FV253S	10 ¾”	9 5/8”	1 ½	12
FV353S	11 ½”	11”	2 ¾	17
FV570S	13 ¾”	13”	6	28
FV858S	16 ¾”	15 3/8”	7	50
FV1208S	21”	21 ¾”	30	185
FV1708S	24”	23 7/8”	39	225
FV2808S	32 ½”	28 ½”	68	395
FV4008S	38”	33 ½”	104	555
FV6508S	52”	41”	168	825

Note: All of the above models have Full Hoods. For applications where space limitations do not permit Full Hood, units are available with special tops.

Falls Filtration Technologies reserves the right to change any model or specification at any time without notice.

Oil Bath:

Request an Oil Bath Brochure in PDF Format

Falls Filtration Technologies reserves the right to change any model or specification at any time without notice.

Oil Bath: How to Determine Correct Type Filter

TABLE F: SELECTION TABLE

TABLE G: TYPES AND SIZES OF BASES AVAILABLE

TABLE H

TABLE J

Oil Bath: